The energy saving of intelligent lighting control system is mainly reflected in which aspects?
The installation of intelligent lighting control system is not only convenient and fast for the owner, but also the most important thing is to bring energy savings to the owners, save energy and protect the environment. So what are the aspects of energy saving in intelligent lighting control systems?
First, centralized management reduces man-made waste. In modern high-rise office buildings, the phenomenon of man-made waste of lighting and energy is very serious. No matter whether the room is occupied or not, it is often a “changing light”. The intelligent lighting control system can not only disperse control but also manage centrally. In the central control room of the building, managers can turn off the lights of unmanned rooms by operating the keyboard.
Second, automatic dimming can make full use of natural light. The light sensor switch in the intelligent lighting control system measures the illumination of the working surface and compares it with the set value to control the light switch. This can maximize the use of natural light to achieve energy saving purposes, and can also provide a seasonal and external climate-free environment. The relatively stable visual environment affected. In general, the closer the window is to natural light, the higher the illuminance provided by the artificial lighting, but the synthetic illuminance should be maintained at the design illuminance value.
Third, it is easy to install and saves cables. The intelligent lighting control system adopts two-wire control, and connects each input unit, output unit and system components in the system with a bus. The large-section load cable is directly connected to the lighting fixture or other power load from the output end of the output unit. No need to go through the smart switch. The installation does not need to consider any control relationship. After the installation of the entire system is completed, the address code of each unit is set by software, so that a corresponding control relationship is established. Because the system only uses the load cable connection between the output unit and the load, compared with the traditional control method, it saves a large number of cables originally intended for ordinary switches, shortens the installation time, and saves labor costs.
Fourth, extend the life of the light source. The fatal cause of light source damage is the overvoltage of the power grid. Controlling the overvoltage can effectively prolong the life of the light source. The intelligent lighting control system adopts a soft start mode, which can control the power grid surge voltage and surge voltage, so that the filament is protected from thermal shock and the life of the light source is extended. Intelligent lighting control system can usually extend the life of the light source by 2~4 times, not only saves a large number of light sources, but also greatly reduces the workload of replacing the light source, effectively reducing the operating cost of the lighting system, and also eliminating the need to deal with the environment caused by the waste light source. pollution problem.
Therefore, the intelligent lighting control system achieves energy conservation and environmental protection through these aspects, reducing energy consumption for itself and even society, and protecting the natural environment. So there is an intelligent lighting control system this system is still very good. I hope everyone can install this kind of system. Everyone contributes a little bit to the community and gives back a little bit of nature. Then everyone is a big one.